Wireless Train Detector Stud
Wireless Vehicle Detector Stud
Wireless Access Point
Wireless Repeater
Wireless Pedestrian Switch Pad Detector
Wireless Bicycle Switch Pad Detector
Wireless Sign Controller
Wireless CCTV 3G Domes
Wireless CCTV Covert Surveillance
Wireless CCTV 3G Body-Worn Solutions
Wireless CCTV 3G Vehicle Solutions
Wireless 3G Covert "One Box"
Wireless Mobile Monitoring
Wireless CCTV Tower Range
2-Wire Vehicle Detection and Classification Stud
2-Wire Vehicle Detection Stud for Traffic Lights
3-Wire Vehicle Detector Stud for Parking / Access Control
3-Wire Terminating Head End
3-Wire Standalone Vehicle Detector Configuration Tool
2-Wire In Road Warning Light Stud
2-Wire Vibration Sensor Stud
2-Wire Pedestrian Switch Pad Detector
2-Wire Bicycle Switch Pad Detector
IRWL Extraction Tool
Network Interface Card (NIC)
2-Wire Line Interface Card (LIC)
Traffic Light Interface Card (TLI)
iStud System Manager Application
Power Supply Unit (PSU)
Sub Rack System (SRS)
The iStud WTD-24 Wireless Train detector uses track
side mounted magnetic and vibration sensors to
detect the presence of trains. The WTD-24 sensor is
wireless, transmitting detection and status data in real
time via low power radio technology to a nearby
Wireless Access Point (WAP-24) that collects and
relays the data.
The iStud Wireless Vehicle Detector uses a 3-axis
magnetic sensor to detect vehicle presence, speed
and classification. This data is transmitted back in
real time via a 2.4 GHz Radio network (ISM Band)
to a Wireless Access Point. This data can be used
in applications to activate a traffic light controller,
determine stationary traffic over a Rail way line,
access control, determine vehicle classification or
forwarded to a central monitoring centre.
The iStud WAP-24 Wireless Access Point maintains
two way wireless communications via low power radio
technology to iStud sensors, wireless repeaters, or a
Network Interface Card (NIC) which provides back to
base monitoring and control. The iStud Access Point
can be operated standalone, connected to a Network
Interface Card or wireless repeater.
The iStud WAP-24 maintains two way wireless
communications via low power radio technology
extending link range by up to 1000m.
The iStud Wireless Pedestrian Switch Pad
Detector combines a Pedestrian Switch Pad
detector and a wireless Stud to allow remote
directional Pedestrian detection events. The
detector communicates directly to a iStud
Wireless Access Point.
The iStud Wireless Bicycle Pad Detector combines
a Bicycle Pad detector and a wireless Stud to allow
remote detection of Bicycles. The detector
communicates directly to a iStud Wireless Access
Point.
The iStud WSC-24 Wireless Sign Controller maintains
two way wireless communications via low power radio
technology between Repeaters. iStud Wireless
Repeaters can communicate to each other over a
radio link of up to 1000m.
The Wireless CCTV Dome Camera System provides
the user with complete flexibility and portability. The
system can be deployed in any location and is ideal
for rapid installation and temporary surveillance
applications. The Dome system has an integrated
camera and transmission unit offered as a 'one box'
solution.
Users are able to dial in remotely, and access live
images or stored digital footage from the internal hard
drive. The camera itself can be controlled remotely
with full pan, tilt and zoom functionality and a 360
degree field of vision.
Each WCCTV system is a completely portable, mobile unit
that delivers live images directly to a PC, laptop or dedicated
monitoring station via 3G mobile phone technology,
broadband and wireless LAN networks, free from most
geographical restrictions. These overt surveillance systems
can be located anywhere, can be worn or even fitted into a
vehicle.
The 3G body-worn solutions strongly improve security
for agents in the field and allow supervisors to coordinate
tactical operations involving multiple agents, while
reducing the need for paperwork. The solutions include
a 3G Camera Vest, 3G Belt and 3G Covert Backpack.
The "Vehicle-Fit" package is a four camera system, powered
by its own independent battery which is also concealed
within the vehicle. Remote pan, tilt and zoom capability can
be provided and a wide variety of other covert cameras are
available, the cameras are then built into key observation
points on the vehicle.
Wireless CCTV’s “one box” solution is an innovative,
completely autonomous mobile surveillance device that
can be instantly deployed, even in the harshest of
operating conditions. This solution can be instantly
deployed for covert surveillance operations. The military
style case and connectors are fully waterproof which
means the equipment can be buried underground and
still function at optimum levels.
Wireless CCTV uses 3G mobile phone technology
and Wi-Fi. This means that each WCCTV portable
surveillance device can be remotely monitored,
while on-the-move, using a laptop or PDA free from
most geographical restrictions.
The WCCTV Autonomous Power Domes can be deployed
in any location and they are ideal for rapid installation,
temporary surveillance or remote applications. Typically
these WCCTV surveillance solutions are used within the
Traffic & Transport sector, for Event Security &
Management or for Remote Site surveillance .
Customers can choose between Wind & Solar or Fuel Cell
powered options. Users are able to dial in remotely, and
access live images or stored digital footage from the internal
hard drive. The camera itself can be controlled remotely with
full pan, tilt and zoom functionality and a 360 degree field
of vision.
The iStud Vehicle Detector uses a 3-axis magnetic
sensor to detect vehicle presence, speed and
classification. This data is transmitted back in real
time to a Line Interface Card (LIC) that can be used
to activate a traffic light controller or forwarded on
to a central monitoring centre for traffic analysis.
The detector is available in two versions, Flush
mounted (pictured) or Sub Surface.
The iStud Vehicle Detector uses a 3-axis magnetic
sensor to detect vehicle presence, speed and
classification. This data is transmitted back in real
time to a Line Interface Card (LIC) that can be used
to activate a traffic light controller or forwarded on
to a central monitoring centre for traffic analysis.
The detector is available in two versions, Flush
mounted or Sub Surface (pictured).
The iStud Standalone Flush Mount & Sub-Surface Vehicle
Detector. The low cost detector has one open collector
output that can be used to signal access control equipment.
An optional terminating interface card allows detections
to be viewed via an indicator LED and provides an optically
isolated output for interfacing into control equipment.
The low cost detector can be used in applications such as;
• Control of car park boom gates
• Vehicle detection in drive-through
• Vehicle counting in toll booths
• Car park space counting
• Automatic motorised industrial doors and gates
• Vehicle detection in car wash
• Truck detection at loading docks
Optional terminating module that provides optically
isolated contact closures, Detection Events LED
indicator, protection and power to iStud vehicle detector.
isolated contact closures, Detection Events LED
indicator, protection and power to iStud vehicle detector.
The iStud Standalone Vehicle Detector Configuration
Tool allows onsite Technicians to adjust the sensitivity
and configurations of the iStud standalone vehicle
detector, monitor performance and upgrade firmware in-situ.
The iStud series of In Road Warning Lights are
available as either a pavement Flush Mounted
device (IRWL-FM) suitable for cross walk
applications or as a Raised Pavement Marker
device (IRWL-RPM) suitable for Lane
Delineation and Tidal Flow control applications.
The iStud Vibration Detector uses a 3-axis accelerometer
sensor to detect vibration in structures. This data is
transmitted back in real time to a Line Interface Card (LIC)
that provides power and two way communications. In
addition, temperature is measured which can be logged
in real time against vibration data.
The iStud 2-Wire Pedestrian Switch Pad Detector
combines a Pedestrian Switch Pad detector and a
2-Wire iStud detector to allow remote directional
Pedestrian detection events. The detector
communicates directly to a iStud LIC.
The iStud 2-Wire Bicycle Pad Detector
combines a Bicycle Pad detector and a
2-Wire iStud detector to allow remote
directional detection of Bicycles. The
detector communicates directly to a
iStud LIC.
The iStud IRWL extraction tool is an installation and
maintenance tool allowing the In Road Warning Lights
to be locked/unlocked and removed/inserted into the
pavement canister.
The iStud Network Interface Card
provides collection and processing
of sensor data, 12 bin vehicle classification
processing, IP & remote connectivity.
The iStud Line Interface Card (LIC) provides
data and power to iStud devices via a 2-wire
interface. The card can operate independently
to provide detection incidents or can be interfaced
with a Network Interface Card (NIC) to provide
Vehicle Classification, remote monitoring and control.
Traffic Light Interface Card, allows a Traffic Light
Controller to signal to the Line Interface Card via
optically isolated inputs activation events.
The card also provides power to the LIC cards
from the Traffic Light controller eliminating the
requirement for the iStud PSU module. The card
also allows on site technicians to monitor and
program the LIC card via a RS232 interface into
a PC running the iStud System Manager Windows
application.
The iStud System Manager is a PC Windows application
that allows all iStud devices to be monitored and configured.
Each devices connectivity appears in the tree structure in
the left hand frame and its properties, status and data
appear in the main panel. Data can be loaded and saved
as required.
The iStud Sub Rack System houses combinations of iSud
LIC's, NIC, TLI, & PSU cards and is typically installed in a
Traffic Light Controller cabinet.
For more product pictures, see Gallery
For more information on each product see Data Sheets